Result Type
Once a drawing definition is started (after a name is defined and frame is selected in the New Drawing window) the Result type tab becomes visible.
- Load cases or Envelopes - create diagrams of internal forces and displacements for load case and envelope results
- Reinforcement - create diagrams of reinforcement amounts or capacity for different Attribute Sets
- Stresses - create diagrams of stresses for load case and envelope results
- Structure - create drawings of the structural system
- Live load visualization - create drawings of the Live Load Visualization on the selected structure
If the drawing definition starts with template, the result type cannot be chosen or changed.
Depending on the chosen "result type" different tabs becomes visible/active. Under this tabs the subsequent result options have to be determined.
If the drawing definition starts with a frame, the "result type" can be changed at any time. By changing the result type the existing definition of result options will be lost.
In cases where multiple views are present (dependent on the Frame Definition), the result type has to be chosen for each view separately. Also the corresponding "result type" dependent tabs can be different and are therefore hierarchically arranged.
Under View name it is possible to define a name of each view/result type. This name is displayed in the preview in the bottom left corner of certain view.